
Power Requirements
A DIVISION OF TRIMBLE
Hardware Overview 31
in the Power Management section.
M6e Power Consumption
Operation
Power/Transmit Mode
RF Transmit
Power
Setting
(dBm)
Max Power
1
(Watts)
Voltage
(Volts)
Current
(mA)
Transmit CW
Transmit Mode = DRM
+31.5
7.5
2
5.0 +/- 5% 1400
Tag Reading
Transmit Mode = DRM
+31.5
7.5
2
5.0 +/- 5% 1400
Tag Reading
Transmit Mode = Power Save
+30 5.8 5.0 +/- 5% 1060
Tag Reading
Transmit Mode = DRM + PreDistortion
+30 6.2 5.0 +/- 5% 1200
Tag Reading
Transmit Mode = DRM
+17 and below 4 5.0 +/- 5% 800
No Tag Reading (M6e idle)
Power Mode = FULL
N/A 0.35 5.0 +/- 5% 60
No Tag Reading (M6e idle)
Power Mode = MINSAVE
N/A 0.12 5.0 +/- 5% 20
No Tag Reading (M6e idle)
Power Mode = SLEEP
N/A 0.005 5.0 +/- 5% 1.0
Boot N/A 0.12 5.0 +/- 5% 20
Shut Down N/A < 0.001 5.0 +/- 5% < 200uA
In Rush Current and Power, M6e
Power up and/or any state change
N/A 7.5 5.0 +/- 5% 1500 Max
Note: 1 - Power consumption is defined for TTL RS232 operation. Power consumption may
vary if the USB interface is connected.
Note: 2 - Power consumption is defined for operation into a 17dB return loss load or better.
Power consumption may increase, up to 8.2W, during operation into return losses
worse than 17dB and high ambient temperatures.
Kommentare zu diesen Handbüchern