Thingmagic Astra Bedienungsanleitung PDF herunterladen (Seite 38)

Controlling the Reader

Astra User Guide 38

 Query Page- Allows the user to write tags; this is only applicable to tags that are

editable.

 Settings Page- Allows the user to modify Reader configuration and network

settings.

 Firmware Upgrade Utility- Upgrades the tag Reader with new firmware images

provided by ThingMagic.

 Restart Page- Allows the user to restart the Reader through a "warm boot."

 Diagnostics Page- Provides the current operating settings and access to the

status logs of the Reader.

 Statistics Page- Provides the statistics that are defined by the EPCglobal Reader

Management Standard v1.0.1

To start the browser-based interface:

1. Exit all Reader applications on the network.

Note

Running another Reader application while using the browser-based interface may

cause a Reader error. If this happens, reboot the Reader or restart it using the

browser-based interface.

2. Start a Java-enabled web browser from any network-enabled PC.

3. Type the IP address of the Reader to which you want to communicate in the

address field of the browser. You can also use Apple's Bonjour protocol to

browse to it.

A log-in dialog appears.

4. Enter the following:

User name: "web"

Password: "radio" (all lower-case).

5. Click OK.

A navigation menu and the Status page appear in the browser, as shown in the

Figure 8.

Status Page

The Astra Status Page, as shown in the Figure 8, indicates the connected antennas,

software version, and LAN configuration of the Reader.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 74 75

Keine Kommentare

Thingmagic Astra Bedienungsanleitung Seite 38