Thingmagic Astra Bedienungsanleitung PDF herunterladen (Seite 46)

Controlling the Reader

Astra User Guide 46

Table 1: RFID Protocol Settings

Note

The Default RQL Query runs continuously at startup and thus a change to this

setting requires a restart of the Reader

Network Settings: All Interfaces

Static network settings are ignored when in DHCP mode, and DHCP-related settings are

ignored when in static IP mode. Please note that your network needs to have properly

configured DNS servers, to connect to the Reader through its hostname. Usually when

using DHCP, the DHCP server will add the hostname to the DNS server's database.

Table 2: Network Settings: All Interfaces

Setting Description

UHF Power This is the power setting for the antenna(s). The maximum is 30.0dBm.

Default RQL Query This field contains the initial query that is run continuously when the Reader

starts

up.

Antenna Mode When the optional external antenna is connected allows the two antennas

to operate in a

Bistatic Configuration.

Setting Description

Network Interface Select between Wired (Ethernet) and Wireless (802.11).

Automatic

Hostname

Turning on automatic hostname will append the last six numbers (3 bytes) of the

Reader’s address to the text in the hostname field.

For example, given a hostname of astra and a MAC Address of 00:12:A4:

13:47:AC, the automatic hostname would be Astra-1347ac.

Hostname This field contains the name of the Reader.

NTP Server This field contains the address of any network time protocol server(s) (Optional).

Domain Name This field contains the network domain name.

Primary DNS

Server

This field allows the Astra Reader to resolve hostnames to IP addresses.

Secondary DNS

Server

This field allows the Astra Reader to resolve hostnames to IP addresses.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 74 75

Keine Kommentare

Thingmagic Astra Bedienungsanleitung Seite 46